Manufacturers produce gas brick equipment gas block production line equipment
Gas brick equipment product produced by aerating block equipment is a new building material with light and porous, thermal insulation, good fire performance, nailing, sawing, gouging and certain seismic capacity. As early as the early 30's, our country began to produce this kind of product, and widely used in Shanghai international hotel, Shanghai tower, Fuzhou building, the People's Bank of China building and other high-rise and low-rise buildings. It is an excellent new building material. And has the advantages of environmental protection. Gas block(gas block production line equipment) is widely used in the world.
|
Design problem of production equipment for sand aeration block of 50,000 m3 |
|||
|
Annual output/daily output |
50,000m3/170m3 |
Number of personnel |
depending on the situation |
|
Steam curing time |
8 hours |
brick pressure |
9-10mpa |
|
Casting and mixing time |
<3min |
resting time |
40min |
|
container loading |
8 large containers |
sea freight |
depending on the situation |
Main raw materials:
Cement: Ordinary Portland cement and slag Portland cement are used, and the quality is in accordance with the Chinese national standard GB175-1999.
Lime: Ground quicklime fineness 0.08mm square hole sieve sieve allowance ≤20%< Weight & gt;
Sand: Fineness (0.045mm square hole sieve margin) is not more than 30%,
Gypsum quality requirements: The quality requirements of dihydrate gypsum should meet national standards.